IRWIN 322035 SDS-Plus 1/2 x 22 x 24 Hammer Drill Bit

IRWIN 322035 SDS-Plus 1/2 x 22 x 24 Hammer Drill Bit Review

IRWIN 322035 SDS-Plus 1/2 x 22 x 24 Hammer Drill Bit Feature

• Patented tip and flute design removes dust more efficiently.
• Chrom Vanadiam shaft
• Shot-peened, double tempered finish reduces breakage
• Copper braze material gives high heat resistance
• Fits all SDS-plus and Hilti TE-C rotary hammers

Fits all SDS-plus and Hilti TE-C rotary hammers. Reduced area above the flute prevents the drill bit from binding while drilling-the full usable length can be utilized. Chrome vanadium shaft through-hardened to 50-53HrC. Patented tip and flute design removes dust more efficiently. Shot-peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss.

Bosch HC2043 S4 SDS-plus Shank Bit 1/4 x 8 x 10-Inch

Bosch HC2043 S4 SDS-plus Shank Bit 1/4 x 8 x 10-Inch Review

Bosch HC2043 S4 SDS-plus Shank Bit 1/4 x 8 x 10-Inch Feature

• Optimized brazing and hardening process for top resistanance in reinforced concrete
• Optimized flute design to reduce stress and make the bit run cooler
• 4-flute design for fast dust removal
• Centric tip for optimal hole geometry

Carbide tipped drill bit head is harder and more resistant to extreme loads. 4 flute design for fast dust removal. For use in drills requiring SDS plus shanks.

DEWALT DW5348 10-Inch SDS Plus Bull Point Bit

DEWALT DW5348 10-Inch SDS Plus Bull Point Bit Review

DEWALT DW5348 10-Inch SDS Plus Bull Point Bit Feature

• Hardened steel body for increased durability
• Sharpened end is great for starting holes
• Fully-hardened steel body and improved flute design
• Sharpened end is especially good for starting holes in masonry material
• Bit measures 10 inches long

The DEWALT 10-Inch SDS Bull Point Bit for rotary hammers features a hardened steel body and sharpened end that works great for starting holes and for light chipping of basic masonry materials such as tile, mortar and glazing compounds. The DeWalt DW5348 10-Inch SDS Plus Bull Point Bit is intended for use with SDS rotary hammers for light chipping and chiseling of tile, mortar, glazing compounds and other masonry products. Designed with a sharpened end, this bit is especially good for starting holes in any masonry material so you don't have to rely on your drill bit alone. Built with a fully-hardened steel body and an improved flute design, this bit delivers increased life and durability.

SDS Carbide Masonry/Concrete Core Drill Bit 1.25" x 6" Product SKU: CB1146 Use: Concrete, Masonry, Brick

SDS Carbide Masonry/Concrete Core Drill Bit 1.25" x 6" Product SKU: CB1146 Use: Concrete, Masonry, Brick Review

SDS Carbide Masonry/Concrete Core Drill Bit 1.25" x 6" Product SKU: CB1146 Use: Concrete, Masonry, Brick Feature

• Product SKU: CB1146Weight: Approximately 1 lbs.Use: Concrete, Masonry, BrickMaterial: Carbide
• Shank: SDS Plus, SDS Max, and Spline with 22mm threading available. Shank and Pilot Bit Sold SeparatelyUse: Concrete, Masonry, Brick
• Shipping & Shipping ChargesHeleta reserves the rights to choose the final delivery method for items shipping ground. We ship most orders the same day if they're received before 12:00 noon CST.
• Heleta will refund the purchase price for any UNUSED item within 30 days of the purchase date. To make a return, please ship the item back with a copy of your receipt. The customer is responsible for all shipping fees unless the mistake was ours.
• Heleta will refund the purchase price for any UNUSED item within 30 days of the purchase date. To make a return, please ship the item back with a copy of your receipt. The customer is responsible for all shipping fees unless the mistake was Heleta's.

Heleta's thick walled Carbide Tipped Masonry Core Bits are ideal for large hole drilling through concrete (not recommended for steel) and masonry using a Rotary Hammer Drill. Our carbide tipped core bits are widely used by plumbing, electrical and mechanical contractors in applications such as drilling for railing installations, through wall drilling for electrical conduit, plumbing and sanitary pipe and relocating anchors using chemical anchoring systems or grout-in-place anchors. Specialty applications include pest control as well as rigging and firestop systems. Reusable shanks for SDS-Plus, SDS-Max and Spline hammer drills are available separately. No reason to buy another shank with each core bit like some other integrated designs.

Bosch HCFC2054 5/16-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit

Bosch HCFC2054 5/16-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit Review

Bosch HCFC2054 5/16-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit Feature

• 4X life in rebar and 40% more life in concrete than competitive full head carbide bits
• Faster drilling speed versus 2 cutter
• Less Carbide Wear than 2 cutter means an end user is more productive with a single bit
• Solid tungsten carbide head with four cutter geometry - extraordinary lifetime and high drilling speed in concrete and concrete with rebar - No jamming when hitting rebar - Optimized for heavy duty rotary hammers
• Stress Optimized flute surface and geometry - For fast dust removal, high power transmission, and optimized stress behavior, no overstraining.

Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.

Bosch HC2011 S4 SDS-plus Shank Bit 3/16 x 4 x 6-Inch

Bosch HC2011 S4 SDS-plus Shank Bit 3/16 x 4 x 6-Inch Review

Bosch HC2011 S4 SDS-plus Shank Bit 3/16 x 4 x 6-Inch Feature

• Optimized brazing and hardening process for top resistanance in reinforced concrete
• Optimized flute design to reduce stress and make the bit run cooler
• 4-flute design for fast dust removal
• Centric tip for optimal hole geometry

3/16" x 4" x 6", S4, SDS Shank Carbide Tipped Bit, Patent Pending 4 Flute Design Provides Fast Dust Removal, Carbide Tipped Drill Head Is Harder, Tougher & More Resistant To Extreme Loads.

Bosch HC2147 SDS-plus Shank Bit 7/8 x 16 x 18-Inch

Bosch HC2147 SDS-plus Shank Bit 7/8 x 16 x 18-Inch Review

Bosch HC2147 SDS-plus Shank Bit 7/8 x 16 x 18-Inch Feature

• Optimized brazing and hardening process for top resistance in reinforced concrete
• Optimized flute design to uce stress and make the bit run cooler.
• 4-flute design for fast dust removal
• Centric tip for optimal hole geometry

Carbide tipped drill bit head is harder and more resistant to extreme loads. 4 flute design for fast dust removal. For use in drills requiring SDS plus shanks.

Bosch T3925 SDS-plus Thin Wall Core Bit Centering Pin 1-1/4-Inch, 1-3/8-Inch, 1-1/2-Inch

Bosch T3925 SDS-plus Thin Wall Core Bit Centering Pin 1-1/4-Inch, 1-3/8-Inch, 1-1/2-Inch Review

Bosch T3925 SDS-plus Thin Wall Core Bit Centering Pin 1-1/4-Inch, 1-3/8-Inch, 1-1/2-Inch Feature

• Designed for core drilling with smaller hammers
• Core body length of 4-1/8 In.
• Cutting depth of 3 In.
• For use with Bosch guide plate T3930-32, core bits T3900-04 and either T3917 4-1/8 In. shank or T3918 11-7/8 In. shank

Bosch SDS-plus reg. rotary hammer core bits are designed for core drilling with smaller hammers with a core body length of 4-1/8? and a useable cutting depth of 3in.

Bosch 11221DVS 7/8-Inch SDS Rotary Hammer

Bosch 11221DVS 7/8-Inch SDS Rotary Hammer Review

Bosch 11221DVS 7/8-Inch SDS Rotary Hammer Feature

• Integrated dust collection system - keeps work environment clean in critical areas
• SDS-plus® bit system - tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
• Multi-function selector - 3 modes of operation, rotation only, rotary hammer and hammer only mode
• Variable-speed reversing trigger - for accurate bit starting, as well as removing fasteners or bound bits
• Constant ResponseTM Circuitry - - Provides soft-start - Maintains constant speed under load - Provides overload protection

The first thing you'll notice about Bosch's rotary hammer is its great ergonomics, which clearly were a major consideration in the design of the hammer. The grip and trigger mechanism are well integrated, especially the front grip, and long enough to accommodate different body styles (I've got long arms; my buddy is the opposite: we both liked the tool's feel). For a rotary hammer, design is especially critical during overhead and down-drilling operations, where fatigue can quickly rear its ugly head. The tool's vario-lock positioning is great; it gives you 36 different working angles to choose from so you can modify the tool to fit the application. Likewise, the hammer offers three operational modes: hammer only, rotation only, and hammer with rotation. We really appreciate the self-contained dust removal system, which does a great job of keeping the mess to a minimum. Are there drawbacks? Not many. The bit-changing mechanism is a little stiff and a little cumbersome, perhaps--but that's a pretty minor negative in a tool that otherwise provides such pleasant operation. The people at Bosch really know what they're doing, and it shows in this tool. --Michael Shilling The first thing you'll notice about Bosch's rotary hammer is its great ergonomics, which clearly were a major consideration in the design of the hammer. The grip and trigger mechanism are well integrated, especially the front grip, and long enough to accommodate different body styles (I've got long arms; my buddy is the opposite: we both liked the tool's feel). For a rotary hammer, design is especially critical during overhead and down-drilling operations, where fatigue can quickly rear its ugly head.

DEWALT DW5349 10 Inch SDS Plus Scaling Chisel Bit

DEWALT DW5349 10 Inch SDS Plus Scaling Chisel Bit Review

Get rid of concrete splatters and other materials with the DEWALT DW5349 scaling chisel bit. Built for use with slotted drive shaft (SDS) hammers and is ideal for chipping or chiseling tough materials. It’s constructed out of hardened steel for longer life and increased job endurance. It measures to 8-inches with 1-1/2-inch chisel tip.

Bosch HC2167 1" x 16" x 18" SDS-Plus Carbide-Tipped Masonry Drill Bit

Bosch HC2167 1" x 16" x 18" SDS-Plus Carbide-Tipped Masonry Drill Bit Review

Bosch HC2167 1" x 16" x 18" SDS-Plus Carbide-Tipped Masonry Drill Bit Feature

• Centric tip for optimal hole geometry
• Less drill bit wander due to improved tip shape
• Spiral flute all the way up to the drilling head for rapid dust removal
• Patent-pending 4-flute design for fast dust removal
• Carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads

Carbide tipped drill bit head is harder and more resistant to extreme loads. 4 flute design for fast dust removal. For use in drills requiring SDS plus shanks.

Bosch 11224VSR 7/8-Inch SDS-Plus Bulldog Rotary Hammer

Bosch 11224VSR 7/8-Inch SDS-Plus Bulldog Rotary Hammer Review

Bosch 11224VSR 7/8-Inch SDS-Plus Bulldog Rotary Hammer Feature

• SDS-plus bit system provides tool-free bit changes with automatic bit locking and dust protection
• Multi-function selector with3 modes of operation, rotation only, rotary hammer, and hammer only
• Variable-speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits
• Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle
• D-handle design for extra control, ideal for overhead and downward drilling applications

Bosch’s 11224VSR 7/8-inch SDS-plus bulldog rotary hammer offers the utmost in versatility and functionality thanks to its compact size and powerful motor. Ideal for use during overhead and down-drilling operations, the 11224VSR features an ergonomic design with a D-handle to increase control yet reduce user fatigue. Multiple working angles and operational modes make this rotary hammer a must-have when working with concrete, brick, stone, and masonry.

11224VSR 7/8-Inch SDS-Plus Bulldog Rotary Hammer At a Glance: SDS-plus bit system allows for tool-free bit changes and automatic bit locking 1.6 foot-pounds of impact force; 0-6,150 BPM; 0-1,100 RPM Powerful 6.9-amp motor for fast removal under load UL listed and OSHA compliant Backed by one-year limited warranty

The 11224VSR's lightweight and ergonomic design makes it ideal for overhead applications (view larger).

Functional Features
The SDS-plus bulldog rotary hammer operates in three different modes for convenience and versatility: hammer/rotation for drilling concrete, stone, brick, and masonry; hammer only for light chipping applications with chisels; and rotation only for drilling in wood, steel, and building materials with the optional chuck. The SDS-plus bit system makes for tool-free bit changes and automatic bit locking—plus, it provides dust protection and the maximum impact energy transfer rate. Its integral clutch minimizes torque reaction, and the variable-speed reversing trigger allows for accurate bit starting and easy removal of fasteners or bound bits.

Powerful Performance
With a 6.9-amp, 120-volt motor, the bulldog rotary hammer packs a punch despite weighing only 6.5 pounds and measuring 17-1/2 inches long. Its no-load speed of 0-1,100 RPM and no-load beats per minute of 0-6,150 BPM—along with 1.5 foot-pounds of impact force—make the 11224VSR ideal for use with a variety of materials. It is capable of a 2-1/2-inch maximum hole diameter in concrete (thin-wall core bit), a 1-inch maximum hole diameter in wood, and a 3/16-inch to 5/8-inch optimal concrete capacity range.

Compact and Ergonomic
The 11224VSR’s 360-degree auxiliary handle is equipped with a built-in depth gauge, which provides users a wide range of movement while maintaining consistent drilling depth. Its D-handle design delivers additional control, especially in down-drilling or overhead applications that typically cause user fatigue. Bosch-exclusive Vario-Lock positioning rotates and locks the chisel into 36 positions to optimize your working angle.

What's in the Box
One Bosch 11224VSR 7/8-inch SDS-plus bulldog rotary hammer, one auxiliary handle, one depth gauge, and one carrying case.

Bosch’s 11224VSR 7/8-inch SDS-plus bulldog rotary hammer is ideal for use with concrete, brick, stone, and masonry (click to enlarge).